The MARTIN MAQ POLISHER LPR 1030 with a new and revolutionary system, can achieve washing, brushing and/or polishing of all types of vegetables and citric fruits in a very efficient way and without causing any damage to the product.

It moves like a pendulum with a 10 brush “cradle”, equivalent to the 18 brushes that a full drum polisher would have.

This way we can obtain a much lower spending on spare parts, reduced maintenance and easier cleaning.

With a total of 17 different types of brushes that always give the best finish to the  product. It is suitable for carrots, potatoes, parsnips, parsley, all kinds of turnips, celeriac, chicory, citrus fruits like oranges and lemons, radishes, etc. This is the appropriate model for an output of up to 25 t/ h.

The Martin Maq Horizontal Conveyors Mod. TDH  (Inspection tables)  are made of PVC and can be used to carry the product from one machine to another.

Adequate for potatoes, carrots, turnips, etc. All the conveyors have adjustable legs (height and inclination) and are easily adaptable to any existing line. Light and highly resistant.

They can carry any type of product (wet). Tensors are placed at the beginning and end of the conveyors, that keep the band in place.

Different sizes and lengths. The power of the motor will be adapted to different customer needs. Lock-gates and deviations can be added.

They can be designed with waste disposal side boxes or with a central track and with whichever platforms required. The inspection tables are made to measure in height and inclination, making them suitable for use.

The Martin Maq Elimination System for Earth ROMU 9P is a machine that will dispose of earth on the product when it  arrives from the field (potatoes, etc).

It is highly efficient when disposing of earth, without harming the product in any way.

It is very resistant (stainless steel) and has very low maintenance.

It can be supplied with a conveyor for collection of waste to dispose of it.

The Martin Maq Circular Hoppers are designed to accumulate large amounts of dry product, so it can then be redirected to the line, for example to feed the weighing machines.

There are various sizes (height and diameter), and is mainly used for potatoes or carrots, etc.

Placed it the middle of a line, it can act as an accumulation point that will not damage the product.

It has a highly resistant exit conveyor to carry the product easily.

Maintenance is very low and repairs rare.

The Martin Maq LBI 900 C Washer is the machine to wash carrots, potatoes, parsnips, turnips, etc. with a capacity of up to 15 t/h.It has cleaning lock-gates, water level detectors, self positioning drum, pneumatic valve for the disposal of mud, adjustable exit door to control the amount of product leaving the machine, speed adjuster for the drum.  The exit conveyor can be made of 2 or 3 meters to be adapted to the machine on an existing line.

This grader is made up of different modules with a total length of 2 meters. Depending on the amount of sizes of the product wanted, more modules can be added to obtain them.

It works by a “jumping” or “up and down” action of the mesh that achieves the different sizes of the product, with a capacity of up to 10 t/h (depending on the amount of modules).

Exit conveyors are required to transport the different grades after the sizing.

The Martin Maq Separating Drum for Solids BSS 930 is designed to eliminate from water any particles of solid matter, with a dimension larger than the gaps on the drum.

The Martin Maq Water Recovery Tank DERE 1014 is used to accumulate water from the washer, polisher, etc.

It is designed to settle the mud towards the bottom of the tank.

The size of this deposit allows for a water pump to be installed inside to move the water. At the same time, the mud can be disposed off easily from the bottom of the tank.

Built entirely in stainless steel, with different filter sizes.

The Martin Maq Dryer SP16R 12 is made of 16 axels specially designed to dry potatoes and similar products, with a capacity between 8 and 20 T/h.

It is a very strong machine and very economical as a result of its simple design.

The function of this machine is to dry the product when leaving the washer or polisher to extend the product’s shelf life.

Very low maintenance.

The Martin Maq Conveyors Mod. IGN are made of ribbed rubber and their main use can be to transport the product from one machine to another. They are horizontal or elevating.

Adequate for potatoes, carrots, turnips, etc…

All the conveyors have adjustable legs (height and inclination) and are easily adaptable to any existing line. Very easy to assemble.

They can carry any type of product, before or after washing and polishing (wet or dry). Tensors are placed at the beginning and end of the conveyors, that keep the band in place.

Different sizes and lengths. The power of the motor will be adapted to different customer needs.

The Martin Maq Elevating Conveyors Mod. IGN are made of ribbed rubber and can be used to transport the product from one machine to another.  

Adequate for potatoes, carrots, turnips, etc. All the conveyors have adjustable legs (height and inclination) and are easily adaptable to any existing line and easy to assemble.

They can carry any type of product, before or after washing and polishing (wet or dry). Tensors are placed at the beginning and end of the conveyors, that keep the band in place.

Different sizes and lengths. The power of the motor will be adapted to different customer needs.

The Martin Maq Horizontal Conveyors Mod. IGL are made of black rubber and can be used to transport the product from one machine to another.  
 
Adequate for potatoes, carrots, turnips, etc.  All the conveyors have adjustable legs (height and inclination) and are easily adaptable to any existing line and are easy to assemble.  

They can carry any type of product, before or after washing and polishing (wet or dry). Tensors are placed at the beginning and end of the conveyors, that keep the band in place.

Different sizes and lengths. The power of the motor will be adapted to different customer needs.

The MARTIN MAQ Modular Conveyors Mod. IML   are made of a polypropylene perforated band. The function of this conveyor is to allow the water to pass at the same time as the  product.  They are adequate to work with the hidrocoolers, washers, at the exit of the destoner, with filtering deposits, ….

Adequate for potatoes, carrots, turnips, etc.  All the conveyors have adjustable legs (height and inclination) and are easily adaptable to any existing line. Light and highly resistant

They can carry any type of product (wet). Tensors are placed at the beginning and end of the conveyors that keep the band in place.

Different sizes and lengths. The power of the motor will be adapted to different customer needs. Lock-gates and deviations can be added.

The MARTIN MAQ POLISHER LPR 1235 with a new and revolutionary system, can achieve washing, brushing and/or polishing of all types of vegetables and citric fruits in a very efficient way and without causing any damage to the product.

It moves like a pendulum with a 12 brush “cradle”, being most probably the polisher with the largest capacity of all the polishers in the market, being able to process between 18 to 35 tons of a product per hour.

This way we can obtain a much lower spending on spare parts, reduced maintenance and easier cleaning.
With a total of 17 different types of brushes that always give the best finish to the product.

It is suitable for carrots, potatoes, parsnips, parsley, all kinds of turnips, celeriac, chicory, citrus fruits like oranges and lemons, radishes, etc. This is the appropriate model up to 40 T/h.

This MARTIN MAQ Brushing Surface is made of 10 brushes and designed to brush potatoes, onions, etc.
When the production is less than 5 t/h, the product must pass the surface dry, which will achieve very good results.

Made in stainless steel, robust, but with a simple design.

The surface has a cover to prevent dust and leaves (dry onions) falling out during use.

The selection of brushes (harder or softer), will depend on the type of product being brushed.

The MARTIN MAQ Double Box Filler is the right machine to fill boxes automatically without stopping, as this  system allows you to change and replace an empty box, while the one next to it is being filled.

It is adequate for potatoes, turnips, etc. and has a capacity between 15 and 20 t/h.

Made of stainless steel with PVC belt.

Protection “cover” for when the product falls into the box.

The MARTIN MAQ Diameter Grader CALDI 58 ZP is a grader with turning rollers perfect to size the product with a capacity of up to 8 t/h.

It is adequate for carrots, parsnips, onions, different varieties of potatoes, turnips, lemons and oranges, etc.

Built entirely in stainless steel, it has great resistance and it is very easy to clean and maintain.

It can grade 4 to 5 sizes with great precision.

It can be adjusted manually or by an electric device.

This MARTIN MAQ Roller Inspection Table MR 615 is the right machine to select potatoes and similar products
in shape, because of the turning action of its rollers.

Indicated for productions of up to 5 t/h, it is very easy to use, with a variable speed adjuster and a central waste track that makes working on both sides of the table possible.

The whole machine is made of stainless steel. The rollers being in this material are long lasting and very easy to clean and maintain.

The machine has product protection covers at both ends (entry and exit), inspection and greasing  lock-gates, adjustable legs to adapt within a line of machines.

This MARTIN MAQ Roller Inspection Table MR1220 is the right machine to select potatoes and similar products in shape, because of the turning action of its rollers.

Indicated for productions of up to 6 t/h, it is very easy to use, with a variable speed adjuster and a central waste track that makes working on both sides of the table possible.

The whole machine is made of stainless steel. The rollers being in this material are long lasting and very easy to clean and maintain.

The machine has product protection covers at both ends (entry and exit), inspection and greasing  lock-gates, adjustable legs.
 

LBI 900G washer is the perfect machine to wash carrots, potatoes,parsnips, turnips, etc. achieving an optimum washed product, with a processing capacity of up to 15 tons / hour.
It has a compact design.
This machine has a self-centred drum system, cleaning lock-gates, water level detector, pneumatic valve that allows the correct flow for mud disposal, adjustable opening exit lock-gate to control the amount of product coming out of the washer and electronic speed adjusters on the drum and on the exit elevating conveyor, that achieve a good cleaning of the product at any working speed and output needed.

This MARTIN MAQ Vibrating SOIL Remover VET 815 (earth and small stones disposal system) is designed to be first in line to eliminate, by vibration, earth, small stones, leaves, etc. Capacity: 10 T/h.
Built entirely in stainless steel, highly resistant, with very low maintenance.
To avoid vibration to the floor or the platforms, it has an anti-vibration system adjusted between the main tray and the structure.
Depending on the product, the machine will have protection bands (entry and exit) or even a cover to avoid excessive dust, falling of leaves, etc.
 

The MARTIN MAQ Leaves remover MEH813, is the right machine to remove leafs, roots, etc, that are already separated from the product (carrots, potatoes…), this being essential before they reach the main machines such as the washer, polisher or grader …

It has a robust structure and is very easy to work. Capacity: 15 t/h.

It occupies very little space and can be placed at the exit side of a washer or water reception hopper.

Height and inclination can be adjusted.

This MARTIN MAQ Receiving Hopper (in water) TRA 2C 640 is the right machine to receive the product from any tipper without harming the product in any way, at the same time of cleaning the product for the first time.

It has a capacity of up to 1,5 tonnes of product.

The elevating exit conveyor has a speed adjuster that can regulate very easily the amount of product leaving the hopper.

A water pump can be added to the machine to make a closed circuit and help the product when leaving the machine.

It is built entirely in stainless steel and it is perfect for potatoes, carrots, etc

It can also be used to accumulate the product at some point within the line, using it as an accumulation and dosage point hopper.

This MARTIN MAQ tipper is designed to tip boxes with a width of up to 1.400 mm. The maximum amount of product it can tip is 2.000 Kg.
All parts of the machine in contact with the product are stainless steel. The main frame is made of high resistance carbon steel.
Hydraulics, electric board and all elements necessary for its functioning are incorporated.
The tipper has protection barriers and a remote control On/off system, following the appropriate safety rules and regulations.
The necessary supports can be manufactured so as to be able to place the tipper at the correct height.

The MARTIN MAQ SACK TIPPER VOLSACK 2000 is designed to tip sacks of up to 2.300 mm tall. The maximum weight it can tip is  2.000 Kg.

Parts of the machine where the product is in contact are made of stainless steel, being the main frame made of highly resistant carbon steel.

Incorporated are the hydraulic system, the electric board and all the necessary elements for the machine to work correctly.

At the same time, it has protection barriers  started with a remote control system, this way following all current safety rules and regulations.

We can also provide the elevating supports to place the machine adequately.

The tipper has a cover that prevents the product being damaged.

The MARTIN MAQ SACK TIPPER VOLSACK 2018 is designed to tip sacks and boxes supported by a pallet of up to 2.200 mm tall. The maximum weight it can tip is 2.000 Kg.

Parts of the machine where the product is in contact are made of stainless steel, being the main frame made of highly resistant carbon steel.

Actualmente, Martinmaq trabaja ocn varios distribuidores de pesadoras y básculas de pesado, dependiendo del tipo de producto.

Para realizar líneas completas de procesado de zanahorias, patatas, plátanos, etc. Martinmaq le puede proporcionar la pesadora o báscula adecuada para cada caso.