Maquinaria - Tolvas (Seco y Agua) | www.martinmaq.com

+34 921 122 122

English |

Castellano |

Français |

Maquinaria - Tolvas (Seco y Agua)

Accumulation dry hoppers. TAC series
	The Martin Maq Circular Hoppers are designed to accumulate large amounts of dry product, so it can then be redirected to the line, for example to feed the weighing machines. There are various sizes (height and diameter), and is mainly used for potatoes or carrots, etc. Placed it the middle of a line, it can act as an accumulation point that will not damage the product. It has a highly resistant exit conveyor to carry the product easily. Maintenance is very low and repairs rare.
		See more

Accumulation hopper TA 222
	The Martin Maq Accumulation Hopper TA222 is a machine designed to separate and accumulate the product in two different parts, being able to feed and be fed by to different conveyors. Perfect to accumulate two sizes at the same time and in the same hopper. Product: carrots, turnips, etc This machine can distribute (with all its width) a product efficiently and feed the machines that follow in a continuous way. For lines with a capacity of up to 15 t/h. Built in stainless steel and covered with a soft material that acts as a buffer and avoids damage to the product. Very low maintenance and easy to clean.
		See more

Circular water hopper TRC 2220
	The Martin Maq Circular Hopper (Water) receives the product and it accumulates it in water, allowing it to soak prior to washing. This process also acts as a pre-wash. Capacity of 6 m3, it can accumulate up to 5 tons of product (potatoes, carrots…) Placed it the middle of a line, it can act as an accumulation point that will not damage the product. This hopper is unique in the market, as it functions with only one water pump, with no conveyors, no bearings or submerged rollers. Maintenance is minimum and repairs rare. It can be placed with machines such as the waste elimination models.
		See more

SETTLING TANK (WATER / MUD) DED 1520
	The Martin Maq Settling Tank DED1520 has the purpose of accumulating water from the washer, hoppers, etc. here the mud remaining will settle. It also has an elevator conveyor and speed adjuster to share the product correctly to the remaining machines on the line. It is designed in a way to cater for two water pumps for a washer, hopper, destoner, etc.
		See more

Elevator IGT with receiving hopper
	The Martin Maq Elevating Conveyors Mod. IGN + Hopper is designed to receive the product from boxes, fork lift trucks or directly from boxes manually. Adequate for potatoes, carrots, turnips, etc. All the conveyors have adjustable legs (height and inclination) and are easily adaptable to any existing line. Made of stainless steel, with a capacity of up to 10 t/h. They can carry any type of product, before or after washing and/or polishing (wet or dry). Tensors are placed at the beginning and end of the conveyors that keep the band in place. Different sizes and lengths. The power of the motor will be adapted to different customer needs.
		See more

Vibration Hopper with leaves remover roller TD 1615 RO
	The MARTIN MAQ Vibration Hopper has the purpose of eliminating leaves. Products are: carrots, parsnips, etc … Furthermore, apart from eliminating loose leaved, it distributes the product efficiently to feed correctly the machines that follow in a continuous way. Built in stainless steel and covered with a unique cushioning material that absorbs the vibration without damaging the product. Incorporated are water sprays (optional and depending on customer’s needs) that improve the cleaning and elimination of leaves. Very easy to clean and low maintenance.
		See more

Dry receiving hopper TRI 625
	The MARTIN MAQ Receiving Hopper TRI 625 is the adequate machine to receive the product from the tipper, or to act as an accumulator at some point within the line. Products: carrots, potatoes, Maximum storing capacity: 1,5 tons . Design to feed a processing line between 5 y 10 T / h. Robust machine, in stainless steel with a very strong and resistant rubber band that can cope with the ware and tear cause by the earth and waste that it carries. It has a motor with a mechanical speed adjuster, that controls the amount of product being processed by the line. Very low maintenance.
		See more

Water receiving hopper TRA 2C 640
	This MARTIN MAQ Receiving Hopper (in water) TRA 2C 640 is the right machine to receive the product from any tipper without harming the product in any way, at the same time of cleaning the product for the first time. It has a capacity of up to 1,5 tonnes of product. The elevating exit conveyor has a speed adjuster that can regulate very easily the amount of product leaving the hopper. A water pump can be added to the machine to make a closed circuit and help the product when leaving the machine. It is built entirely in stainless steel and it is perfect for potatoes, carrots, etc It can also be used to accumulate the product at some point within the line, using it as an accumulation and dosage point hopper.
		See more

Accumulation and slow release hopper TD 1040
	The MARTIN MAQ Accumulation and Slow Release Hopper TD1040, is a vibration hopper that accumulates and places the product in an even way over the total surface of the machine. Perfect for carrots, parsnips, etc. With this feeding the machines that follow in a continuous way, for example sack fillers or weighing machines. Built in stainless steel, with a special cover that absorbs vibration and protects the product from damage. Easy to clean with very low maintenance.
		See more

Dosage hopper TD 1615
	The MARTIN MAQ Dosage / Vibration Hopper TD1615 distributes evenly the product over the machine. Perfect for carrots, parsnips, ….Distributes the product efficiently and prepares it to feed the following in a continuous way. Built in stainless steel and covered (padded) to avoid any damage. Very easy to clean and maintain.
		See more

Dry receiving hopper TRI 650 B
	The MARTIN MAQ Receiving Hopper TRI650B is the perfect solution to receive the product directly from trucks or tippers. It has a capacity of 3,5 tons of product (carrots, potatoes, turnips…) It is indicated for processing lines with a capacity of 15 tons per hour. Its all made in stainless steel and the band is made of rubber. For these reasons this machine is strong and with a long life. The motor has a speed drive controller to regulate the amount of product that leaves the hopper. Also, it has protecting shock absorber bibs.
		See more